|
10-06-2010, 03:00 PM | #26 |
Bovinus Administratus
Join Date: Feb 2009
Location: Greener pastures
Posts: 32,377
|
3.5 inch...pea shooter exhaust! Should have gotten 10 inch.
__________________
|
10-06-2010, 03:02 PM | #27 |
Og low truck driver
|
I could shove my head in that bitch.
---------- Post added at 09:02 AM ---------- Previous post was at 09:01 AM ---------- And repz since we will have bamf tips. And cheaper than cez's lol
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 03:09 PM | #28 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
My plan is to cut my OEM exhaust off on a straight line since it looks like this and keep the tip flush with the side of the bed. The obs already has a stainless exhaust so I can weld it with the arc welder in the shop. Might have to heat the pipe up with a torch and bend it up some too. I want it closer to the body. ---------- Post added at 10:09 AM ---------- Previous post was at 10:08 AM ---------- That pipe is 2.5", so 3.5" tips will look fine. |
10-06-2010, 03:15 PM | #29 |
Og low truck driver
|
clean your truck.
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 03:18 PM | #30 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
That was last september........
---------- Post added at 10:17 AM ---------- Previous post was at 10:15 AM ---------- These things are 10" long?! Holy shit Gonna have to break out the saw ---------- Post added at 10:18 AM ---------- Previous post was at 10:17 AM ---------- Chad, gonna ship USPS? They should fit in a flat rate box. |
10-06-2010, 03:20 PM | #31 |
Og low truck driver
|
They don't seem that long. Mine are gonna tuck up under the truck anyway.
and yes, usps.
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 03:24 PM | #32 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
Yea the pictures don't have anything to scale by. That's what the ad says anyway. I'll text you my postal address. It's different than my street address.
http://cgi.ebay.com/ebaymotors/Dual-...#ht_4771wt_758 Dual Angled Stainless Exhaust 3.5" New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions Dual 3.5" Slanted Cut Exhaust Tips Stainless Steel - Universal Fit *AUCTION IS FOR A PAIR EXACTLY AS SHOWN!* This auction is for a PAIR of Yonaka Motorsports exhaust tips. These tips are BRAND NEW and fully polished 304 stainless steel. It features dual 3.5" OD outlet tips, with a 2.5" OD inlet on the collector side. 10.25" total length. |
10-06-2010, 03:40 PM | #33 |
Og low truck driver
|
Fuck, the ones I'll be ordering aren't stagered are they?
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 03:51 PM | #34 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
Nope. Straight with angled tips.
|
10-06-2010, 04:05 PM | #35 |
Og low truck driver
|
I didn't even notice that.
Not sure if want those. I wanted CORSA style but I only paid attention to the tip and not the angles.
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 04:17 PM | #36 |
Join Date: Feb 2009
Location: Hoenn
Posts: 85,082
|
he didn't make you pay an extra $5?
__________________
|
10-06-2010, 04:26 PM | #37 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
The first ones are corsa style, but over $100 with shipping. DNW
---------- Post added at 11:22 AM ---------- Previous post was at 11:21 AM ---------- I really don't think it will make that much of a difference. I still want it. ---------- Post added at 11:26 AM ---------- Previous post was at 11:22 AM ---------- I'm sure you can get $35 out of yours |
10-06-2010, 04:32 PM | #38 |
Og low truck driver
|
I hope. I'll see what I can do if not just tuck em away like I want and get more drone away from the cab.
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 04:35 PM | #39 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
|
10-06-2010, 04:39 PM | #40 |
Og low truck driver
|
I'm not gonna screw you like that.
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 04:42 PM | #41 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
Lol. I figured you'd just zip the money back if you didnt want them.
|
10-06-2010, 04:49 PM | #42 |
Og low truck driver
|
Plus, I looked at the tips again and they are SLIGHTLY offset. like the left tip on the left side of the car is a little furth out. So one of us is gonn have to flip the tips over for them to looks right lol
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 05:01 PM | #43 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
Rofl. They look even to me. Doesn't matter either way though. They're angled on the ends so they'll have to be run right-side-up. It won't be enough to notice.
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ---------- I'm definitely thinking I'm going to heat and bend my exhaust pipe to make it tucked up closer to the body. Looks way better ---------- Post added at 12:01 PM ---------- Previous post was at 11:53 AM ---------- Like this but not shitty looking. This looks interesting too. |
10-06-2010, 05:10 PM | #44 |
Join Date: Feb 2009
Location: Hoenn
Posts: 85,082
|
DNW the last one unless it is dual and has two on each side
__________________
|
10-06-2010, 05:32 PM | #45 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
me stock pipe leaves something to be desired. ass end looks too naked with it cut off
|
10-06-2010, 07:04 PM | #46 |
Og low truck driver
|
My pipe already came in and I got it mounted on too.
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
10-06-2010, 07:10 PM | #47 |
Join Date: Feb 2009
Location: Hoenn
Posts: 85,082
|
wow and you also have a dark colored passenger bedside and OEM plastics
gtfo
__________________
|
10-06-2010, 07:17 PM | #48 | |
Og low truck driver
|
Quote:
The dude mounted that all wrong. I would have flipped it over and moved it closer to the tire.
__________________
Colormatched/Blackbear Tuned/DMH cutout/Magnaflow/Vette Servo/Stockers/ 4/7 Dropped/Pacesetter LT's |
|
10-06-2010, 07:18 PM | #49 |
Secret Shit y0
Join Date: Aug 2009
Location: No longer on vacation :blah:
Posts: 16,859
|
Yeaaaaaaaaa that looks ratarded.
|
10-06-2010, 07:20 PM | #50 | |||
C-E-Z★ bitch
|
Quote:
Quote:
word
__________________
Quote:
|
|||
Bookmarks |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Funny... Found on Craigslist | theholycow | Anything Goes | 49 | 08-05-2010 10:56 PM |
Found on another forum | theholycow | Anything Goes | 16 | 04-19-2010 05:26 AM |
Move over Michael Jackson, Chris Cornell pwned your song | theholycow | Music | 2 | 08-06-2009 05:03 PM |
Phrases Found on Resumes | BillyJeanKing | Anything Goes | 2 | 07-14-2009 03:26 AM |
Found this on another forum... | Shaggy | Anything Goes | 5 | 04-14-2009 03:36 AM |