PDA

View Full Version : Question: How the hell does this happen?

theholycow
11-13-2009, 01:50 AM
http://failblog.files.wordpress.com/2009/10/epic-fail-tire-change-fail.jpg

That jack is under the OEM-specified jack point.
BillyJeanKing
11-13-2009, 01:58 AM
they cranked it so far that it crumpled up

I guess they thought the car would eventually start to lift off the ground
Ewok
11-13-2009, 02:00 AM
looks like they had it out to far not under the pinch weld but under the cladding itself.

---------- Post added at 01:00 AM ---------- Previous post was at 12:58 AM ----------

they cranked it so far that it crumpled up

I guess they thought the car would eventually start to lift off the ground

live by the saying if you force it -- it will go.....
BillyJeanKing
11-13-2009, 02:05 AM
live by the saying if you force it -- it will go.....

I've broken so many things because of that :facepalm:
chevyrado14
11-13-2009, 04:00 PM
never let a woman change a flat :read:
JayBo
11-13-2009, 04:01 PM
Thats pretty ball3r
theholycow
11-13-2009, 04:22 PM
Why is that lame pinch weld the OEM-specified jack point anyway? Shouldn't they have you jack something beefy?

For changing tires when not using the OEM jack, I jack under the A-arm or similar, something right next to the wheel. That's a lot less jacking since it just lifts the wheel instead of lifting the whole car and letting the wheel drop.
Cez★
11-13-2009, 04:24 PM
i jack the frame up :shrug:
JayBo
11-13-2009, 04:33 PM
if on front, I lift a-arm. If on rear. the whole rearend gets lifted. ON the ford I can lift the front and rear w 2 jacks and have all 4 wheels off the ground.
Solid Axle FTW!

Btw, putting the 39.5 boggers back on for the weekend :evil:
theholycow
11-13-2009, 04:41 PM
Jay, how do you lift the whole rear end?
JayBo
11-13-2009, 04:44 PM
lift it under the chunk.
theholycow
11-13-2009, 04:44 PM
"Chunk"?
Cez★
11-13-2009, 04:45 PM
pumkin?
JayBo
11-13-2009, 04:45 PM
err...
I put the jack under the differential housing.
chevyrado14
11-13-2009, 04:55 PM
i do the same on my truck when i rotate the tires expect i have 2 jack stands on the front frame
theholycow
11-13-2009, 04:59 PM
err...
I put the jack under the differential housing.

Yeah, that's what I thought you meant. I have heard of this plenty but I don't think I've ever actually seen it. I worry that it could mess up the diff or axle but if it's common practice then obviously it doesn't.
Cez★
11-13-2009, 05:00 PM
i thought thats how you always do it for the rear
JayBo
11-13-2009, 05:01 PM
Yeah, that's what I thought you meant. I have heard of this plenty but I don't think I've ever actually seen it. I worry that it could mess up the diff or axle but if it's common practice then obviously it doesn't.

No way man. When I worked at the service station/tire place thats just about the ONLY way we'd lift the rear of a vehicle if possible. Even on semi trucks.
theholycow
11-13-2009, 05:05 PM
:head3: Awesome. That'll save me some time and effort from now on.

Is it ok to run the truck in drive like that? For example, if you for some reason need to let the wheels spin while off the ground...
Cez★
11-13-2009, 05:06 PM
yes
JayBo
11-13-2009, 05:13 PM
:head3: Awesome. That'll save me some time and effort from now on.

Is it ok to run the truck in drive like that? For example, if you for some reason need to let the wheels spin while off the ground...

I've never had a problem doing it. Just chock the front wheels very very very well :rofl2:
2005_Silverado
11-13-2009, 05:19 PM
Id put the axle down on jack stands if I wanted to let the tires spin...they arent too stable when you lift them from the center of the axle....they can tip over.
stonehenge
11-13-2009, 08:48 PM
the Nizzan jack has to go on the pinch weld since the jack is made gheylike to only go there. Works like a champ though, none of that door-foldy action like above :jester:
theholycow
11-13-2009, 09:35 PM
Yeah, a lot of OEM spare tire jacks are made to only fit there.
Cez★
11-13-2009, 09:37 PM
i remember my friend got a flat on his honda and we used his crappy oem jack. as i was lifting it the fucking thing got sideways and teh car fell :roflmao: :headpalm: